The Boogie Board

Discussion Forum for Mesa Boogie Products
It is currently Wed Dec 13, 2017 11:13 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Wed Sep 20, 2017 12:49 pm 
Offline
Mark IV

Joined: Thu Feb 21, 2008 1:51 pm
Posts: 580
So! I had my boogie serviced and modded by Monsta-Tone like ten years ago (including replacing all the filter caps). I played it for a year or so and, due to the sheer terror and ferocity of it, downsized to another rig.

FFD to now. Took the Boogie out of the rack, put it back in its headshell, and fired it up. All the tone I remember and love is there, but so is a new visitor -- weird friggin' irritating noise in Lead Mode (maybe it's just too quiet to hear in R2/R1). Lead Mode is unplayable without a fat nasty gate. I opened 'er up (details below) and she was clean as a whistle. Amp has been rack mounted in a fully enclosed rack for these many years. Visually, nothing was out of place or looked weird. Caps all seem fine. No dust at all. Nothing obvious.

Input - 6.5
Lead drive - 6ish
Lead master - 7ish
Master - < 2

What I've tried:
Cleaned/lubed all the pots (Caig D5/F5)
Cleaned all the tube sockets
Tensioned all the tube sockets
Cleaned all of the jacks
Rolled a bunch of different tubes in every position. No change in any case.

Observations (forgive the super obvious ones)
Noise goes away when I plug into the loop return
V3 -- no matter what tube I put in there -- is microphonic as crap
Noise goes away when I take V3 out
Noise seems to be affected (crackling/whistling/static/etc -- it changes and moves) when I ungently manipulate V3
The PT seems to be softly humming/vibrating

Here's a recording of the noise. Nothing's plugged into the amp.
https://www.dropbox.com/s/7g1asaolfk1gb ... e.mp3?dl=0

HELPMEH! PLEASE! Where ought I to look? I'm thinking about looking at the V3 socket, but that's...a chore...

Tusen takk!


Top
 Profile  
 
PostPosted: Thu Sep 21, 2017 7:40 am 
Offline
Dual Recto

Joined: Tue Feb 07, 2006 11:21 pm
Posts: 2825
Location: North Alabama C+ Mafia-Kingpin
I have heard of the FX return jack contacts going bad if something is left plugged in for long periods of time. If running a short jumper cable from the FX Send to the FX return fixes the noise, then I would highly suspect that this is your problem.

_________________
"One of these days, I'm gonna change my evil ways....... one of these days.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group