DC-5 A, Tube swapping

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

j.hentschel

New member
Joined
Jul 27, 2017
Messages
3
Reaction score
0
Hello there,

this is Joachim from Germany. I was wondering if I could do a BIAS mod to get the Opportunity of swapping between 6L6 and 6V6 Tubes. The idea is to tame the loudness of this little monster.I don't use the drive channel - just the "clean" channel, slightly broke up (Gain set at about 6), with a Maxon TS9, a Boss Blues Driver and a TC Spark Booster in front.
Does the BIAS mod to having the chance to swap the Power-Tubes make any sense to you guys?

Any comments are highly appreciated!

Greetings, Joachim
 
Change the first input preamp tube (v1) to a less powerful mu. I place a 12au7 in mine. It allows you to crank the volume knob up while keeping the overall loudness down. Thus getting the big 6l6 power tubes cooking.
 
Back
Top