Dc3 EQ/REV ftswtch?

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Im pretty sure my simple Peavey two button works. I decided not to switch the EQ on and off so I forgot. I'll check it though when I get a chance. Bob
 
OK my simple 2 button Peavey ft switch works.

2 on/off switches. The sleeve is common and goes to both switches. The ring(middle contact) goes to one switch and the tip goes to the other. Bob
 
No problem. Im going to make it to Mark lll soon. lol! ..keep posting....Bob
 
Hi guys,

I'm resuming this old post in search for some help.

I've got the version A of a DC-3 combo and want to make a footswitch with leds for the control of Rev and Eq.

Since I've never seen an original Mesa footswitch and I don't even know if it comes with leds or not...I was wondering if the amp would be able to power the leds or if I'd need to add a battery for this purpose.

Thank you
 

Latest posts

Back
Top