DC-5 pull boost modification

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Red=Lead!

Member
Joined
Feb 4, 2008
Messages
14
Reaction score
0
Location
England
Anyone know how to or where (Great Britain only) to get the pull boost modified so it can be foot switchable? It's a seriously sick tone and is getting neglected most of the time because I can't turn it on and off with my foot. :(

Any help would be appreciated!

Cheers guys!
 
The Pull Boost just switches in a couple of parts that change the Tone Stack.

Basically, it adds more capacitance to the Treble capacitor.
It also switches in a resistor so that the amp is not as loud as it could be with the Boost.

Take a look at the DC-5b schematic for the clean channel Tone Stack.
 
Monsta-Tone said:
:D It's easy to add Adam! :D

I think you have me mistaken for a repair technician! :D I can do an FX loop mod, or clip a resistor, but replacing resistors, pots, rewiring, etc is not my forte - although I'd like to be able to do that kind of stuff!

I think I'll leave well enough alone for now. It sounds just fine!
 

Latest posts

Back
Top