E erickompositör72 Well-known member Joined May 7, 2020 Messages 93 Reaction score 2 Location NYC Jun 28, 2021 #1 Looking to just put them in the class a/b sockets, not in the class a (simul-class) sockets. :?:
M MisterMojo Member Joined Jun 29, 2020 Messages 20 Reaction score 1 Location East TX Jun 29, 2021 #2 I’d be concerned about the voltages that the SImulClass would expose them to. You’re looking at around 500PV, and IIRC, WGB are rated at 400PV.
I’d be concerned about the voltages that the SImulClass would expose them to. You’re looking at around 500PV, and IIRC, WGB are rated at 400PV.
E erickompositör72 Well-known member Joined May 7, 2020 Messages 93 Reaction score 2 Location NYC Jun 29, 2021 #3 Right- although I bought them after several people recommended them for my Fuchs Overdrive Supreme... which has similar plate voltages.
Right- although I bought them after several people recommended them for my Fuchs Overdrive Supreme... which has similar plate voltages.
S stokes Well-known member Joined Feb 19, 2006 Messages 1,464 Reaction score 0 Location NYC Aug 17, 2021 #4 I have used them in my IIC+ with no problem.They are sturdy tubes, but you will be using them above their rated voltage and I wouldnt recommend it.
I have used them in my IIC+ with no problem.They are sturdy tubes, but you will be using them above their rated voltage and I wouldnt recommend it.
