Updated Mark III+ Info

Mark I's, II's, III's and the almight IV

Moderators: Guitarzan, Grandor, ned, Platypus

jrb32
Mark III
Posts: 173
Joined: Wed Jan 31, 2018 8:32 am

Re: Updated Mark III+ Info

Post by jrb32 » Thu Apr 12, 2018 8:09 am

Bollocks sorry! Will update them now :)

jrb32
Mark III
Posts: 173
Joined: Wed Jan 31, 2018 8:32 am

Re: Updated Mark III+ Info

Post by jrb32 » Thu Apr 12, 2018 8:26 am

Updated with that info. Is your Blue a 100W/60W or Simulclass out of interest?

jrb32
Mark III
Posts: 173
Joined: Wed Jan 31, 2018 8:32 am

Re: Updated Mark III+ Info

Post by jrb32 » Thu Apr 12, 2018 8:34 am

Keen to see how the IIC+ affects your black stripe.
I'll let you know! I want to get as much info out there first along with drawing up a board layout which will take time having my board pulled. Then I will do a full IIC+ conversion mod and see what happens. Don't expect this for a few weeks at least though!

I'm also finding some info about the IIC++ currently which is VERY interesting. More on that soon.

Thanks,

Jon

jrb32
Mark III
Posts: 173
Joined: Wed Jan 31, 2018 8:32 am

Re: Updated Mark III+ Info

Post by jrb32 » Sat Apr 14, 2018 6:29 pm

Finished a board layout for easier modding/repairs/schematics for different stripe versions :) Found a few schematic numbering errors in my original so will update that shortly. Hopefully you should be able to confirm if R26 exists on your Blue Stripe now easily.

Image

PDF LINK TO LAYOUT: https://drive.google.com/open?id=1CTJOj ... 0_XyNOSSJ6
PDF LINK TO SCHEMATIC: https://drive.google.com/open?id=1Hwhcz ... 9XKAcg0aeT

Hope that helps. Will order some final parts to mod mine to a IIC+ including EQ section and put up a guide. I'm also going to do the R2 volume mod, Reverb Mod (already done on yours) and an increased reverb mod (putting R242 back around R131 and changing R131 from 1.5M to 1M like in the IIC+)

Thanks,

Jon

Post Reply