Slight breakup tone

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Seanboy

Well-known member
Joined
Feb 5, 2012
Messages
167
Reaction score
0
Looking for some help.
Trying to get a tone with just a little breakup. Playing a Strat with sing coils.
Amp is a Mark III simul-class no stripe, GEQ.

Setting suggestions? Including GEQ.

Thanks!
 
You could easily get this by driving R1 hard with Vol = 8-9, Treble = 7-8 and then a little Master vol.

R2 can do a lot more of this, although it is quite bassy in stock form. You'll have to reduce the rotary bass knob to ~1 and carefully balance treble + presence. Lead Drive can be around 3-4 if your Volume = 7. Do you have the R2 volume on the back panel? Graphic always works best for me as a medium U shape (love my mids!). The rest is up to your guitar volume knob. 8)

But of course any online Mark tone recipe is just the starting point for your actual amp. These are tweaker's amps!
 
Back
Top