Mesa Boogie Mark IV Combo

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

maxime1122

New member
Joined
Dec 8, 2015
Messages
3
Reaction score
0
I bought this combo last week (Mark IV) and I'm learning on how to set it, etc. (Marshall background).. sounds good, but different. I'll see if I like it in the long run!

BTW, the R2 footswitch is working 50% of the time, all the others are working fine except this one.. sometimes it's working fine and sometimes it's not changing the channel. Any idea why?

Thanks!
 
The owner's manual is a must read for this amp. If you play heavy metal, you will want the bass control at 0-3 and bring the bass back with your GEQ slider.
 
steelehead said:
just got one myself and im not sure of the pedal you are referring to. here's the link for mark iv pedal = http://mesa.stores.yahoo.net/fcfu3.html

mesa2.jpg



mesahead2.jpg


also there are settings= here = http://www.grailtone.com/tone-settings/mesa-boogie/view-mark4-settings.html#

Good Luck

Yeah, it's the FU3 footswitch.. not sure if there's a way to fix it ! instead of buying another!
 
Could just be a dirty switch,if you're lucky.First thing to do is try cleaning the switch.Just get some contact cleaner and spray it into the switch where the shaft of the button enters the switch.Push the switch a few times and spray and manipulate the switch again.If that doesnt work,dont just go buy a new switch,could be something in the switching circuit inside the amp,time for a trip to the tech.
 
Back
Top