Mark IIC (not IIC+) draft schematic

Mark I's, II's, III's and the almight IV

Moderators: Guitarzan, Grandor, ned, Platypus

chipaudette
Donating Member
Posts: 327
Joined: Mon Jan 19, 2009 8:49 pm
Location: Vermont, USA

Re: Mark IIC (not IIC+) draft schematic

Post by chipaudette » Mon Jul 13, 2009 6:42 am

Hi Again,

I opened up the amp AGAIN. I confirmed the 750p value on the treble shift by looking at it. I also corrected a few other values...

Mark IIC, Schematic V1.2:
http://picasaweb.google.com/lh/photo/yG ... directlink

I also mapped out most of the EQ circuit and most of the power amp circuit. I'll draw that up this week.

Thanks for your interest!

Chip

User avatar
jvk
Donating Member
Posts: 394
Joined: Wed May 10, 2006 12:52 am
Location: UK

Re: Mark IIC (not IIC+) draft schematic

Post by jvk » Mon Jul 27, 2009 12:06 am

Hello gentlemen. Here you go:

IIC+ pcb bottom
Image

Word of caution... the level of butchery that I've performed here should only be practiced if you don't mind sacrificing the amp (partly at least), because you would be desoldering, cutting wires and/or damaging the pcb traces (amazing how easy the traces come off) on a 25 year old relic :)

All the best
Jonny
Last edited by jvk on Mon Jul 27, 2009 10:28 am, edited 1 time in total.

chipaudette
Donating Member
Posts: 327
Joined: Mon Jan 19, 2009 8:49 pm
Location: Vermont, USA

Re: Mark IIC (not IIC+) draft schematic

Post by chipaudette » Mon Jul 27, 2009 5:44 am

Hi Johnny,

Thanks so much for posting this pic. Unfortunately, when I click on it, I get an error from google...

The requested URL /_o912b1uGg_c/Sm0y8oTmN7I/AAAAAAAAABA/r2By-2Y06Q4/DSC02855.JPG was not found on this server.

Could you re-check your link? I'm dying to see the pic!

Thanks,

Chip

User avatar
jvk
Donating Member
Posts: 394
Joined: Wed May 10, 2006 12:52 am
Location: UK

Re: Mark IIC (not IIC+) draft schematic

Post by jvk » Mon Jul 27, 2009 10:30 am

The link should be fixed now.

chipaudette
Donating Member
Posts: 327
Joined: Mon Jan 19, 2009 8:49 pm
Location: Vermont, USA

Re: Mark IIC (not IIC+) draft schematic

Post by chipaudette » Sun Apr 29, 2012 9:12 pm

Hi All,

To anyone who still cares, I got a PM asking about my IIC (not IIC+) schematic. So, I dug it out again and saw that I had updated it without uploading it. So, if you want the latest version, the link is below. Note that there is now a page 1 (preamp) and a page 2 (power amp, EQ and a partial schem for the power supply). Enjoy!

Page 1: https://picasaweb.google.com/lh/photo/6 ... directlink

Page 2: https://picasaweb.google.com/lh/photo/9 ... directlink

Gallery: https://picasaweb.google.com/lh/photo/6 ... directlink



Chip

Thermionc-Apocalypse
Bottle Rocket
Posts: 1
Joined: Thu Sep 14, 2017 1:03 pm

Re: Mark IIC (not IIC+) draft schematic

Post by Thermionc-Apocalypse » Thu Aug 08, 2019 2:10 am

Chip, sadly the links with all your hard work are dead.

Do you think it might work better to attach them to a reply rather than using fickle external hosts?

Post Reply