F-30 footswitch cable schematic?

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

darren

Well-known member
Joined
Jun 26, 2007
Messages
53
Reaction score
0
Hi, all

I'm about to transition to a TC Electronics G-System to run my whole rig, and i want to use the onboard relays to change channels and engage the Contour mode on my F-30. Is there a schematic somewhere that will show me how to take a DIN5 plug and split it off into a pair of TRS plugs to allow the G-System's relays to do channel and contour switching? (Not interested in switching the reverb, since i'll be using the digital reverbs in the G-System.)

Also, are the switches in the footswitch toggle switches or momentary switches?

Thanks for any help!
 
I got a schematic from Mesa/Boogie (thanks, Kris!), and was able to successfully wire up a cable.

I only use the Channel and Contour switching, as i'm using the G-System for reverb... the amp's reverb is never used.

Here's a schematic i made, should anyone else need it:

F-Series_footswitch_schematic.jpg
 
I've lost my F-30 footswitch cable and would like to know if I buy a normal 5 pin (male/male) DIN cable, will it work?
Or are the pin's in standard cable differently connected?
 

Latest posts

Back
Top