Archon
Member
- Joined
- Feb 29, 2020
- Messages
- 5
- Reaction score
- 1
Hi guys! I recently acquired a 3 Channel Triple Rectifier & I want to convert the Loop from Parallel to Series. I want to run a noise gate & an EQ in the loop & it's just not possible with the parallel loop.
I read through this entire thread: https://forum.grailtone.com/viewtopic.php?f=24&t=36840 & walked away more confused than when I started.
My question is this... is there a way to modify this loop from parallel to series & get no bleed, tone loss or volume drops at all?
Please, let's stick to 3 Channel Triple Rectifiers only in this thread. The other thread got cluttered up with other models & from what I've read they're not modded the same way.
This is the schematic I got from Mesa Boogie but they didn't elaborate on bleed, tone loss, or volume drops.
I read through this entire thread: https://forum.grailtone.com/viewtopic.php?f=24&t=36840 & walked away more confused than when I started.
My question is this... is there a way to modify this loop from parallel to series & get no bleed, tone loss or volume drops at all?
Please, let's stick to 3 Channel Triple Rectifiers only in this thread. The other thread got cluttered up with other models & from what I've read they're not modded the same way.
This is the schematic I got from Mesa Boogie but they didn't elaborate on bleed, tone loss, or volume drops.
