3ch MW back panel channel selector

Discussion area for Single, Dual and Trip Rectifers

Moderators: Guitarzan, Grandor, ned, Platypus

Post Reply
Miro9486
Bottle Rocket
Posts: 15
Joined: Sun Mar 13, 2016 3:39 am

3ch MW back panel channel selector

Post by Miro9486 » Sat Sep 15, 2018 11:28 am

Hi,
I’ve started using rotary switch to change channels on my 3ch MW recently. It behaves a bit weird. Going click by click, from ch1 towards ftsw - it goes ch1-ch2-ch1-ch3-ch1(ftsw w/out ftsw connected). Similar situation going back, with this one additional ch1 out of order. Is it normal situation? I had some problems with the head changin channels by itself that went away after changing footswitch.

User avatar
Authorized Boogie
Mark IV
Posts: 688
Joined: Wed Sep 08, 2010 4:12 pm
Location: Petaluma, California
Contact:

Re: 3ch MW back panel channel selector

Post by Authorized Boogie » Mon Sep 17, 2018 1:01 pm

Miro9486 wrote:Hi,
I’ve started using rotary switch to change channels on my 3ch MW recently. It behaves a bit weird. Going click by click, from ch1 towards ftsw - it goes ch1-ch2-ch1-ch3-ch1(ftsw w/out ftsw connected). Similar situation going back, with this one additional ch1 out of order. Is it normal situation? I had some problems with the head changin channels by itself that went away after changing footswitch.
If you rotate the switch slowly, its seeing the in-between positions as "no contact" and selecting the Default channel, CH1.
MESA/Boogie - Product Specialist/Customer Service - http://www.mesaboogie.com/support/index.html

Post Reply