Dual Rec. 3 channel request

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

NunoVanBamSteen

Active member
Joined
Aug 24, 2010
Messages
33
Reaction score
0
Location
Chicagoland
Hey, I have an 02 dual rec solo hesd that developed a weird problem that I figured out quickly enough, but the secondary issue that I found many cold solder joints on the rectifier board.
As a result, while I was repairing one issue, another popped up.
A grey wire from the plus side of the 220uF caps dislodged from somewhere on the recto board. I think i have the answer from the schematics, but I would love it if someone has a gut shot that happens to show where the dang thing attaches. There is no obvious remnants of the wire break on the board.

Any help is appreciated.
NVBS
 
Solved my own problem. The schematics proved useful and it was the rectifier supply lead.
The amp is happy and healthy and amazing as ever!
 

Latest posts

Back
Top