Installed: Roadster CH2 BRIT Mid Scoop Mod - Video

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Golden1984

Well-known member
Joined
Nov 11, 2007
Messages
74
Reaction score
0
I just installed additional mid-scooping tone stack for BRIT mode.
It was kinda useless for me because of too much mids...

https://www.youtube.com/watch?v=IRcn6tRroj4
 
domct203 said:
Golden1984 said:
I just installed additional mid-scooping tone stack for BRIT mode.
It was kinda useless for me because of too much mids...

https://www.youtube.com/watch?v=IRcn6tRroj4
Sounds good.

How about sharing the details of this "mod"?

Dom

Here it is:

http://www.gonerjenny.com/files/TS.jpg

No need to touch mainboard. Just put it before CH2 MASTER POT.

It works just like a 3 band EQ from CH3&4 all set to 12 o clock. Even in that position it cuts away lots of middle. You can change resistor values to get different EQ curve, but I found it scooped enough in zero position. CH2Brit has also less drive stages than Roadster`s channels 3&4 so it`s original tone stack effects overall tone shape a little bit more than it does in Lead channels of MARK series amps.

I also installed a relay switch connected to clean/fat/brit miniswitch to engage this additional tone stack only for BRIT mode and bypass it while on clean&fat modes.

Greetings!
 
Back
Top