Scott Rolf
Active member
- Joined
- Sep 11, 2011
- Messages
- 33
- Reaction score
- 0
I really could use some first-hand information about this before I plop down $500.00.
First of my set up is as follows:
Mesa Stiletto Ace Combo
M-Audio Fast Track Pro audio interface
Mac
Logic DAW
I know that I can use the RC as a load box thus bypassing the amps speaker and go direct out to the interface while using software speaker simulation. From all of the literature on the net it sounds like this works very well. However, I have uncovered some questionable threads from other forums although I don't know how knowledgeable these users were.
Does anyone out there have any first hand experience with the RC used this way?
Thanks.
First of my set up is as follows:
Mesa Stiletto Ace Combo
M-Audio Fast Track Pro audio interface
Mac
Logic DAW
I know that I can use the RC as a load box thus bypassing the amps speaker and go direct out to the interface while using software speaker simulation. From all of the literature on the net it sounds like this works very well. However, I have uncovered some questionable threads from other forums although I don't know how knowledgeable these users were.
Does anyone out there have any first hand experience with the RC used this way?
Thanks.