EFX12 - using insert with mic issue

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

johntimber

New member
Joined
Jul 16, 2018
Messages
1
Reaction score
0
Hi,

Strange problem - I have a Soundcraft EFX12, it’s pretty new and hasn’t given me any problems until now. I’m hoping it’s just ‘operator error’, but when I try and use a channel with a microphone (either an SM57 or AT 2030) and insert cable (running to an FX loop with various Moog pedals etc), I get almost no level on the mic - it’s like it’s running it pre-everything into the pedals. If I crank the gain up to almost full I get a small amount of signal but with nasty distortion.If I remove the insert, the channel behaves as normal. If I use a line input with the insert, that also works as expected. I can’t work it out. It’s my understanding that an insert is post gain but pre fader/eq on these and pretty much all desks, so I just can’t see how I’m not getting a normal level.I’ve tried various channels and get the same thing.Any ideas?

Please help.

I didn't find the right solution from the Internet.

References:-
https://www.soundonsound.com/forum/viewtopic.php?f=15&t=60127
Motion graphics video company

Thanks!
 

Latest posts

Back
Top