|The Boogie Board
|Help me understand Dual Rec tube function
|Page 1 of 1|
|Author:||parabola66 [ Thu Dec 24, 2015 10:27 pm ]|
|Post subject:||Help me understand Dual Rec tube function|
I was looking at the manual to reach up on the functions of each tube in the Dual Rec. What I don't under stand is why the preamp tubes are split in 2. Meaning the V1 tube is split into V1a and V1b. Why is one tube split into two functions? Does this mean that it matters what pin holes the tube's pin go in, whether one side gets the extra pin, the A or the B side? (I have never switched tubes before so idk if it matters) circuitry wise.
|Author:||screamingdaisy [ Fri Dec 25, 2015 12:20 am ]|
|Post subject:||Re: Help me understand Dual Rec tube function|
A 12AX7 is made up of two separate triodes. Basically, it's two tubes in one. The socket is keyed so they only fit one way.
|Page 1 of 1||All times are UTC - 6 hours [ DST ]|
|Powered by phpBB® Forum Software © phpBB Group