A Little Insight into Mesa's Thinking.

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Guitarzan

Well-known member
Joined
Dec 19, 2005
Messages
1,661
Reaction score
0
Location
Sherman Oaks, CA
Hi All,
We just had an Andy Timmon's clinic here in town today and several reps came out to promote the gig as well. I had a great talk with Rich Longacre (Mesa's Divisional Sales Rep for the Western U.S.)

First I'd like to let everyone in on the thinking behind Mesa's tube choices. I addressed the tube issue with Rich and asked what Randall Smith thinks of JJ tubes and other assorted tubes as well. His answer was that Mesa (Randall and his engineering group) Select tubes mostly on durability. Their perspective is that if they can put out the amp and have the tubes last as long as possible, without the end user having to change tubes frequently, then, they feel their product is best when viewed in that light.

Contrary to popular belief here (Boogie Board) Randall has experimented with JJ's and various other tubes. His long time Master Tech, Mike Bendinelli, has a favorite tube (Sylvania 6L6's) which he bench marks EVERYTHING off of. Mike claims that the new Chinese 440's that Mesa have in their Recto's/RK's/Roadsters' and LSC's are the closest thing to the old Sylvania's and the sound that he favors hearing. Mesa feels that the JJ's do sound good however, their operational lifetime is not "up to par" with Mesa's guidelines.

Mesa has also had a tough time finding quality EL-34's. Which Rich quickly pointed out that Mesa has looked at the JJ EL-34L and is pleased with it's capablilty. They also have looked at the KT-77 but the jury is still out on that decision. Which brings me to the Groove Tube connection. Mesa is close with Aspen at Groove Tubes and always ask Aspen for his new tubes that are manufactured (here in the U.S.) Mesa supports the production of new tubes here with earnest and looks forward to the day when quality tubes are once again mass produced State side. Rich informed me that the only other tube that "WILL NOT VOID YOUR WARRANTY ARE GROOVE TUBES WITH A #4 to #7 RATING" Mesa WILL NOT replace these tubes if one comes back to them for repairs loaded with GT's, but they Won't void the amps warranty for using them. Got That! Good.

Another aspect that Rich pointed out was the spec/tolerance that Mesa tests for. He claimed that in a shipment of JJ's, that they tested, the percentage that passed Mesa standard was very low and it was not worth it to offer JJ's at this time. The deciding factor to Mesa was the fact that JJ will not give Mesa a price break on mass quantities of tubes.

Rich pointed out that Mesa buys their tubes from Ruby and most folks in the industry already know this, so for the few out there who don't know this...now you do.

Also mentioned was the addition of Aluminum chassis to the Roadster and Stiletto Ace's. Rich explained that Mesa is using these chassis because of less electrical interference with component placement within the amps as compared to the steel chassis used in the Rectos/Stiletto Duece/Trident's. Mesa is only offering this feature on the above mentioned amps. The cost of aluminum has skyrocketed as of late and offering this material to the public results in Mesa passing on the costs to the consumer. This is not a quality issue with the materials!! It's just that with the circuit design of the Roadster and Stilletto Ace, Aluminum is a better choice of material.

Hopefully this will give everyone here a better understanding of Mesa's thinking and challenges of putting out a quality product while dealing with the business world.

Regards,
Guitarzan
 
Wow, that's great information. I've been running EH EL-34's in my DR (And I've been getting a very good lifespan out of them), but have been looking at JJ EL-34L's. It makes me wonder just what kind of life expectancy I could get out of the JJ's.
 
Glad to hear that Mesa gives thumbs up to Groove tubes.
I know that alot out there think a silk screen'd name on a glass bottle
is hype,but I have had nothing but good luck with G.T tubes.
They have always been my fav's for power sections.
Thanks for the insight Guitarzan.
 
I can definetly understand this from a buisness point of view but a tube failure isn't such a catastrophic thing to me as an end user who takes a solid interest in what I'm playing through. The off chance that I'll have to replace tubes is worth the 50 bucks to have better tone for the countless times they work perfectly fine.

It is what it is
 
Platypus said:
I can definetly understand this from a buisness point of view but a tube failure isn't such a catastrophic thing to me as an end user who takes a solid interest in what I'm playing through. The off chance that I'll have to replace tubes is worth the 50 bucks to have better tone for the countless times they work perfectly fine.

It is what it is


Agreed.
 
this is all fine and dandy but the most important thing about this is how fantastic was andy timmons? he is one of my heros and his new cd "resolution" is killer!!!! did he rock?
 
Andy is one of the nicest guys I have ever met. He did his first set through an LSC 2x12 with an extention 2x12 cab. Very organic sound, this was his mellow set. The second set was through a Series II Stiletto Deuce. This set just kicked ***! His tone and technique were amazing! His signautre Ibanez was a cool piece as well. Mahagony S-series body with a maple cap in vintage sunburst. The neck was a bit thicker than the original wizard necks, a Wilkinson trem, and two Dimarzio custom pickups. Try and get him in your town, you won't be dissapointed.
 
I would think that Mesa would have to give consideration to GT as a better tube screener than they are themselves because they are without a doubt.
 
I tried the jj 12ax7 preamp tubes in my dual rec recentlyand honestly i was really displeased with the result. just the overall sound was really dull and flat sounding. the clean had no sparkle the distortion had no gain.. so i ended up putting the mesa preamp tubes back in.. the jj 6l6 on the other hand i'm very happy with. but for some reason unlike most I DO like mesa tubes
 
Dexfairshotgp said:
I tried the jj 12ax7 preamp tubes in my dual rec recentlyand honestly i was really displeased with the result. just the overall sound was really dull and flat sounding. the clean had no sparkle the distortion had no gain.. so i ended up putting the mesa preamp tubes back in.. the jj 6l6 on the other hand i'm very happy with.
I had exactly the same experience with both my Mark IV short head, and my 50/50 poweramp.
 
This is good stuff to hear and its nice to know that mesa aren't just pushing their product for profit.
 
"He claimed that in a shipment of JJ's, that they tested, the percentage that passed Mesa standard was very low and it was not worth it to offer JJ's at this time. The deciding factor to Mesa was the fact that JJ will not give Mesa a price break on mass quantities of tubes

This is B.S. from Mesa about the longevity of JJ tubes. I had a set in my MK IV for almost three years and gigging it every weekend and only replaced them because the legnth of time seemed excessive and wanteed to put fresh ones in there.

I think the latter part of the quoted statement is the real reason Mesa doesn't offer JJ tubes.
 
I've always held firm to this suspicion. All of us geeks at first must wonder why Uncle Mesa uses a Chinese tube somewhere.

I think Mesa is looking ahead. They have no control over the manufacture, but they can control a second round of quality control state-side. Because who knows, tomorrow a janitor could drop a lit spleef into the dry garbage at one of them factories and it's up in smoke. Their brand of testing ensures that the next manufacturer can provide a similar product that sounds good and can be pushed for reliability.

I think Mesa and GT and the indie sophisticates are doing a great thing for tubeland. If pure market capitalism had its way here we'd all be gambling drunk.
 
Dexfairshotgp said:
I tried the jj 12ax7 preamp tubes in my dual rec recentlyand honestly i was really displeased with the result. just the overall sound was really dull and flat sounding. the clean had no sparkle the distortion had no gain.. so i ended up putting the mesa preamp tubes back in.. the jj 6l6 on the other hand i'm very happy with. but for some reason unlike most I DO like mesa tubes

Thank you - I had the exact same experience, I thought it was time to bring the amp in for repair, no joke - it was that bad.
 
JAZZGEAR said:
This is B.S. from Mesa about the longevity of JJ tubes. I had a set in my MK IV for almost three years and gigging it every weekend and only replaced them because the legnth of time seemed excessive and wanteed to put fresh ones in there.

i agree. i've had JJ 6L6 tubes in my peavey 5150II for over a year and a half with quit extensive use and they still sound amazing and put out the same amount of output as when i first got them. JJ tubes are my favorite hands down.
 
Hi Guys, Don't make the mistake for one minute that Groove Tubes are made in the US. They are ONLY manufactured in Russia, Czeck Republic, Yuogslavia and China. Aspen Pittman has been selling that misinformation and "snake oil" for years and if Mesa does a deal with them it is due to distribution and $$$ reasons only. So he tests them for gas and transconductance, big deal, that's basic quality control fo all tube manufacturers. Svetlanas winged Cs are among the best of the Russian EL34s currently manufacured. The current "Mullard EL34" are not made in the US but in Russia, and imported distributed by MArk Samson's New Sensor company. Don't be fooled!
 
faitaccompli said:
Hi Guys, Don't make the mistake for one minute that Groove Tubes are made in the US. They are ONLY manufactured in Russia, Czeck Republic, Yuogslavia and China. Aspen Pittman has been selling that misinformation and "snake oil" for years and if Mesa does a deal with them it is due to distribution and $$$ reasons only. So he tests them for gas and transconductance, big deal, that's basic quality control fo all tube manufacturers. Svetlanas winged Cs are among the best of the Russian EL34s currently manufacured. The current "Mullard EL34" are not made in the US but in Russia, and imported distributed by MArk Samson's New Sensor company. Don't be fooled!

Thanks, we understand this...
 
Russ said:
I would think that Mesa would have to give consideration to GT as a better tube screener than they are themselves because they are without a doubt.

I don't think someone read my post clearly. Again...

I would think that Mesa would have to give consideration to GT as a better tube screener than they are themselves because they are without a doubt.
 
As far as what faitaccompli wrote:

I would have to say that it is hard to even think that GT actually makes their own tubes because they have designations that signify what tube it is that is screened though they were instrumental in the retooling and reissue of some tubes. :p

But yeah, anyone who thinks GT is the actual manufacturer of the tubes that they market is a fool and deserves to pay more than what GT already overcharges.
 

Latest posts

Back
Top