Meet the Twins

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
M

mefgames

Well-known member
Joined
Dec 18, 2006
Messages
113
Reaction score
0
Just thought I'd post a couple of pix of the Thiele cabs I just finished building. Thanks to all those who posted plans, pix, and advice.

http://i634.photobucket.com/albums/uu66/mefgames/Thieles/IMG_3033.jpg
http://i634.photobucket.com/albums/uu66/mefgames/Thieles/IMG_3035.jpg


Thanks, mike
 
I buy leather remnants. I made an industrial strength cookie cutter from a strip of sheet metal that I use to cut out the shape, then finish cutting any uncut portions by hand. Tedious, but effective.

added photo of leather corners soaking just before applying to show shape

http://i634.photobucket.com/albums/uu66/mefgames/Thieles/IMG_3026.jpg
mike
 
I had 2 original coffee can 8 ohm EV SRO 12's in an old Fender cab that was so heavy it was pretty much a hernia waiting to happen. When I saw the thread about building Thiele cabs, I thought that might be a good alternative. The 2 Thieles are still pretty heavy, but manageable. I'm told the EV's alone weigh 19 pounds each.

mike
 

Similar threads

Thundermtn
Is it time for a T.R. tune up?
Replies
5
Views
381
bandit2013
bandit2013
B
Converting Sparton tube console to amp
Replies
0
Views
471
bluebug
B
N
Sold / Withdrawn FS: TA-30 (cosmetically modified, electronically TSBed)
Replies
3
Views
1K
numinor
N
FastEddie
Nomad 45 4x10 Combo (Conversion?)
Replies
1
Views
2K
bgh
B
W
This is why replacing capacitors is NOT optional!
Replies
2
Views
5K
Henz
H

Latest posts

Back
Top