The Boogie Board

Discussion Forum for Mesa Boogie Products
It is currently Tue May 23, 2017 9:15 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: MXR back lid/plate
PostPosted: Thu Jun 02, 2016 1:25 pm 
Offline
Mark III
User avatar

Joined: Sat Dec 17, 2005 11:16 am
Posts: 238
Location: Bellwood, PA
Hey guys, I'm looking to find a back lid/plate for my vintage MXR Distortion+ pedal. It was missing when I got it. I've checked all over the web and can't seem to find just the lid/plate. I've found several places to buy the whole box, but I don't need it. If I have to, I guess I have to, but I was hoping to find just the lid/plate. Any help would be appreciate it, thanks in advance.

_________________
...Bleed Boogie forever...

Mesa Stiletto Deuce II Head
Mesa Subway Rocket 1x10 Combo
4x12 Recto Slant Cab


Top
 Profile  
 
 Post subject: Re: MXR back lid/plate
PostPosted: Mon Feb 06, 2017 1:06 pm 
Offline
Bottle Rocket

Joined: Mon Feb 06, 2017 12:50 pm
Posts: 1
You have a couple different options. You could look for a used small ZVEX Power Plate on eBay. They average about $20+ used, but $40-$50 new, which is a little high. But these also kind of kill two birds with one stone.

Or you could go to Small Bear get either an MXR box or possibly just the back plate. I can't get their site to load at the moment, so I'm not sure what exactly they have in stock right now. If you emailed them, they could probably tell you exactly what you need.


Top
 Profile  
 
 Post subject: Re: MXR back lid/plate
PostPosted: Wed Feb 15, 2017 12:54 pm 
Offline
Donating Member
User avatar

Joined: Thu Oct 15, 2009 1:30 pm
Posts: 2522
Location: San Francisco Bay Area, CA
The MXR boxes are standard project boxes, so they shouldn't be too difficult to find. Though they do generally sell them packaged as a whole unit, not as parts.

http://www.newark.com/hammond/1590cgy/m ... 0001290557

_________________
Electra Dyne Head
JP-2C WICKER, Baby!
Mini Rectifier blue LED
Recto 2x12 Horizontal
2x Recto 2x12 Vertical


Top
 Profile  
 
 Post subject: Re: MXR back lid/plate
PostPosted: Fri Feb 17, 2017 11:35 am 
Offline
Mark III
User avatar

Joined: Sat Dec 17, 2005 11:16 am
Posts: 238
Location: Bellwood, PA
Thanks for the info guys, much appreciated.

_________________
...Bleed Boogie forever...

Mesa Stiletto Deuce II Head
Mesa Subway Rocket 1x10 Combo
4x12 Recto Slant Cab


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group