Page 10 of 13

Re: Post your pedalboard

Posted: Tue Mar 20, 2012 12:50 pm
by fdesalvo
I have a smaller footswitch on the way and will be placing my TC Flashback on the lower tier.
Image

Had to make a custom power supply cable out of spare parts I had lying about. Even though it appears to be wrapped in painter's tape, the wires are twisted, soldered and double heat shrink wrapped.
Image

I used the tape on the edges of the aluminum plates to help mitigate the chances of damage to the wires' insulation on the rough edges. I'll be filing these smooth later on.
Image

Used my nippers to cut a groove for the zip tie.
Image


I can't recommend the Pedalpad highly enough. it's the only board out there that offers a staggered, two-tier design, so you don't have to point your toes and sharp-shoot to hit the pedals you need. You can set it up to be a stright incline if you wish, however. Two caveats - the power supply is utter crap that comes with these boards, so toss it. The other is that when touring, the TSA will disassemble the board to look underneath the plates - and they won't bother putting it back together...in the event you go on tour, use a pedaltrain.

Best,

Re: Post your pedalboard

Posted: Fri Mar 30, 2012 8:38 am
by Jackie
Image

Also on the multi. I thought about getting individual pedals at some point but I get all my drive tones from the amp and these FX sound so great when you tweak them right I didn't really find a good reason to sell it or move to pedals.

Re: Post your pedalboard

Posted: Fri Mar 30, 2012 11:08 am
by dante
Oh how I love these threads :)

Image

TC Nova System : Boss Tuner : Mesa Amp Switch : Boss V-Wah. The silver tube is a flashlight - crucial to live giggin

Re: Post your pedalboard

Posted: Fri Mar 30, 2012 11:35 am
by benjamin801
dante, I just noticed your TU-2. Don't trust the Nova System's tuner? :wink:

Re: Post your pedalboard

Posted: Fri Mar 30, 2012 12:47 pm
by TremoJem
It is my first one ever so be kind...

Image

All Neutrick Gold and Mogami 2524 for signal and Neutrick Nickel and Mogami 2319 for switching.

And yes, it took a few days to layout and solder everything.

I will say that this is the BlackBird pedalboard I bought online.

I customized it for my use, which included replacing two locking jacks with gold jacks and adding a gold locking jack and adding five nickel jacks for switching, other than the small drill holes for cables it was...stock.

Re: Post your pedalboard

Posted: Fri Mar 30, 2012 2:16 pm
by Geiri
TremoJem wrote:It is my first one ever so be kind...

Image

All Neutrick Gold and Mogami 2524 for signal and Neutrick Nickel and Mogami 2319 for switching.

And yes, it took a few days to layout and solder everything.

I will say that this is the BlackBird pedalboard I bought online.

I customized it for my use, which included replacing two locking jacks with gold jacks and adding a gold locking jack and adding five nickel jacks for switching, other than the small drill holes for cables it was...stock.

This, dear sir, is absolutly stunning. Uber clean and tidy. My hat is off to you.

Re: Post your pedalboard

Posted: Sat Mar 31, 2012 12:26 am
by elvis
My previous board:

Image

My current board (Trying to move everything into the rack)

Image

Re: Post your pedalboard

Posted: Mon Apr 02, 2012 5:51 am
by TremoJem
Thanks Geiri, I really appreciate that. Maybe I will post a pic of my entire rig just for fun.

Re: Post your pedalboard

Posted: Mon Apr 02, 2012 5:56 am
by TremoJem
Oh what the hell, here goes:

Image

Re: Post your pedalboard

Posted: Mon Apr 02, 2012 12:38 pm
by Release
Image
(The Mesa switch is just a basic channel switch with a custom graphic)
Image
Image

... and I just put a new custom label I designed on the Deja Vibe....

Image

Re: Post your pedalboard

Posted: Mon Apr 02, 2012 11:59 pm
by jpdennis
Here is the one I use with various stage bands;

Image

Here is a quick setup board (literally) I use at jam sessions and the like;

Image

Dennis

Re: Post your pedalboard

Posted: Tue Apr 03, 2012 4:47 pm
by Geiri
TremoJem wrote:Oh what the hell, here goes:

Image
Now that's cool set up. I have my self a simpler version of what you are doing. That is I have 1 rectoverb combo and the boss gt 10. It's more than enough for my needs and honest to God out of my 6 previous mesas and various gear this is my favorite set up. And while I'm on it my favorite amp bar none.

Re: Post your pedalboard

Posted: Wed Apr 04, 2012 5:30 am
by TremoJem
Thanks Geiri.

I am looking for another Marshall 1960B.

I would then put one Tremoverb on each 4x12.

I also want to load them with V30s.

I might even consider an X Pattern of G12H-30 and the V30s.

Hopefully I will find another Marshall soon.

Thanks again.

Re: Post your pedalboard

Posted: Wed Apr 04, 2012 6:38 pm
by Geiri
TremoJem wrote:Thanks Geiri.

I am looking for another Marshall 1960B.

I would then put one Tremoverb on each 4x12.

I also want to load them with V30s.

I might even consider an X Pattern of G12H-30 and the V30s.

Hopefully I will find another Marshall soon.

Thanks again.
How does the trem sound through the marshall ?

Re: Post your pedalboard

Posted: Wed Apr 04, 2012 10:55 pm
by elvis
I did an X-pattern of V30 and G12T-75 in a 4x12 and I really liked it. You might also try V30 and C90, another favorite combination.