Mark III circuit board experts chime in

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

swanation45

Member
Joined
Nov 11, 2016
Messages
8
Reaction score
0
I recently got this red stripe, simul, GEQ, no reverb. It has a R2 volume knob added in the back, replaced power/standby switches, and lead master potentiometer replaced. Everything appears to be installed cleanly and it sounds great. Does anyone see anything else that appears to be changed or modded? Thanks!
 

Attachments

  • B1C0E11A-786C-4A03-A077-4D21E6F17582.jpeg
    B1C0E11A-786C-4A03-A077-4D21E6F17582.jpeg
    583.7 KB · Views: 40
  • 94B1DE83-F5D4-4E8C-8ABD-7F7BC4E92BC7.jpeg
    94B1DE83-F5D4-4E8C-8ABD-7F7BC4E92BC7.jpeg
    448.1 KB · Views: 0
  • 89374C91-E4FB-4D83-90AF-5F82A805BB2F.jpeg
    89374C91-E4FB-4D83-90AF-5F82A805BB2F.jpeg
    360.9 KB · Views: 0
  • CA1FF9BB-93A5-4160-A154-B5601AEFB82B.jpeg
    CA1FF9BB-93A5-4160-A154-B5601AEFB82B.jpeg
    364.8 KB · Views: 0
  • 0509C870-E068-403B-8B97-794A743C9BF8.jpeg
    0509C870-E068-403B-8B97-794A743C9BF8.jpeg
    412.8 KB · Views: 0
It’s a bit hard to see on the pics where the right wire (looking from the rear of the chassis) goes from the R2 volume pot. Can you try to get a pic from a different angle?
Seems like R130 and 131 were removed completely.
 
I recently got this red stripe, simul, GEQ, no reverb. It has a R2 volume knob added in the back, replaced power/standby switches, and lead master potentiometer replaced. Everything appears to be installed cleanly and it sounds great. Does anyone see anything else that appears to be changed or modded? Thanks!
Did you buy and return this to Guitar Center?
 
Back
Top