Search found 680 matches

by Authorized Boogie
Tue Feb 26, 2019 6:21 pm
Forum: Mark Series
Topic: Safe to disconnect reverb tank from Mark IV?
Replies: 3
Views: 1075

Re: Safe to disconnect reverb tank from Mark IV?

nor wrote:
Tue Feb 26, 2019 5:04 pm
My tech (Lowell Amps) recommends pulling the tube as well.
If you did that, the amp would have no sound - V3 and V4 necessary. There is absolutely no need to remove the reverb driver/return tube when using the amp after disconnecting the reverb tank wires.
by Authorized Boogie
Fri Feb 22, 2019 12:48 pm
Forum: TC50
Topic: TC 50 Combo Noise
Replies: 3
Views: 446

Re: TC 50 Combo Noise

Hey all, I’m hoping somebody has a similar experience with this so I don’t have to completely disassemble my TC 50 combo amp… The amp makes a noise like tube rattle when I’m playing lower octave notes. It’s a relatively loud noise as I’m playing at about 90 dB and can hear it. At first I thought it...
by Authorized Boogie
Wed Feb 20, 2019 12:06 pm
Forum: Rectifier Series
Topic: Replacing Power Tubes in a solo 150w head
Replies: 10
Views: 700

Re: Replacing Power Tubes in a solo 150w head

Actually by the way things are actually wired in the amp, there is nothing in the power stage that either knows or cares if you arrange your power tubes in symmetrical pairs or not. Let's say your power tubes are three pairs color coded red, green, and blue. One pair of each color. Traditionally yo...
by Authorized Boogie
Thu Feb 14, 2019 6:46 pm
Forum: Rectifier Series
Topic: Capacitor replacement on mesa boogie amps
Replies: 3
Views: 343

Re: Capacitor replacement on mesa boogie amps

My Roadster is coming up on 12 years old and I have no reason to even consider it. The amp plays great and is played at band volume 4-5 hours every week plus gigs since I got it. These are the years when you reap the rewards of Mesa build quality. Are you having any issues with the amp? If not, don...
by Authorized Boogie
Thu Feb 14, 2019 12:26 pm
Forum: Mark Series
Topic: Mark IIC++ Hetfield mod
Replies: 79
Views: 23139

Re: Mark IIC++ Hetfield mod

Much of this is true - there is SO much misinformation about the update and mods. Also, correct - it is all in Mike B's head. However, when he "retires" from Mesa, it doesn't mean he won't be doing the work!
by Authorized Boogie
Mon Jan 21, 2019 4:59 pm
Forum: Mark Series
Topic: Maintenance For Mark IIC+
Replies: 14
Views: 1594

Re: Maintenance For Mark IIC+

Out of curiosity....anyone know how much it would cost (including shipping) to send it to Mesa for a recap job including shipping? A full General Service, which usually includes a complete cap job, checking ALL components specs, re-building the pots, cleaning jacks, sockets, etc and a thorough head...
by Authorized Boogie
Thu Dec 20, 2018 12:22 pm
Forum: Dual Caliber
Topic: 50Cal - EL84 Version - Tube Layout Question
Replies: 1
Views: 1105

Re: 50Cal - EL84 Version - Tube Layout Question

BMW-KTM wrote:Am I correct in assuming that "V1" in this picture is furthest to the left and that the numbers then migrate up as you move to the right?
(ie: V1, V2, V3, V4 & V5 .... in that order)



Image
V1 will always be closest to the input jack
by Authorized Boogie
Wed Dec 19, 2018 12:25 pm
Forum: Modern Era Amps (1991-Present)
Topic: nomad channel switching mod
Replies: 2
Views: 746

Re: nomad channel switching mod

Unfortunately, the Breakout box is no longer available. Thanks
by Authorized Boogie
Tue Dec 11, 2018 11:42 am
Forum: Mark Series
Topic: Photo request: Mark IIC+ preamp circuit board
Replies: 23
Views: 3134

Re: Photo request: Mark IIC+ preamp circuit board

Don't even think about putting the tantalum caps in. There is no such thing as a tantalum capacitor that sounds good and when they go bad they become hard shorts. Put in electrolytics instead, best of all, non-polarized ones. Mesa uses those awful tants only because they are cheap and they offer a ...
by Authorized Boogie
Wed Oct 31, 2018 12:22 pm
Forum: Atlantic Series
Topic: Royal atlantic head through road king 2x12 cab.
Replies: 4
Views: 1468

Re: Royal atlantic head through road king 2x12 cab.

That's a pretty specific setup, those road king cabinets are rare - not because they're special, I think they're just not very popular. Make a new back panel for your Orange cab that's about 1/4 open, it'll take you an afternoon, save you $400, and you can test whether a part-open 2x12 is going to ...
by Authorized Boogie
Tue Oct 23, 2018 10:54 am
Forum: Mark Series
Topic: Maintenance For Mark IIC+
Replies: 14
Views: 1594

Re: Maintenance For Mark IIC+

Out of curiosity....anyone know how much it would cost (including shipping) to send it to Mesa for a recap job including shipping? A full General Service, which usually includes a complete cap job, checking ALL components specs, re-building the pots, cleaning jacks, sockets, etc and a thorough head...
by Authorized Boogie
Tue Oct 23, 2018 10:52 am
Forum: Mark Series
Topic: Maintenance For Mark IIC+
Replies: 14
Views: 1594

Re: Maintenance For Mark IIC+

A full recap job including the bias caps, plus pot and jack cleaning, and (maybe) new tubes is all it should need. If it's a low hours unit the tubes may all be good but they should still be tested. Be very sure to warn your chosen tech that he can't have your tubes no matter what!!!! Be sure to us...
by Authorized Boogie
Mon Oct 22, 2018 2:52 pm
Forum: Mark Series
Topic: Life After a Mark IVb
Replies: 12
Views: 1213

Re: Life After a Mark IVb

What went so wrong that it cannot be fixed? I was getting noise. A blown fuse. I replaced the tubes. Another blown fuse. Then channel 1 cut out. I took it to a repair shop next to Berklee School of Music that was double recommended by my childhood guitar teacher and also a veteran pro musician. The...
by Authorized Boogie
Thu Oct 04, 2018 10:50 am
Forum: Modern Era Amps (1991-Present)
Topic: NAD Fillmore 50...with a buzz....
Replies: 3
Views: 918

Re: NAD Fillmore 50...with a buzz....

I just received my Fillmore 50 and am loving the "vintage" vibe i'm getting! I've only been able to play it about an hour or two to test it out and begin to get the feel of the amp with my guitar, but I am a bit concerned after I turned it up loud to get that "alive" feel, lol! It started buzzing, ...
by Authorized Boogie
Thu Oct 04, 2018 10:48 am
Forum: Rectifier Series
Topic: Blown fuse
Replies: 3
Views: 662

Re: Blown fuse

You have a power tube that is on the way out. Cycling the power is often one way to quell and intermittent short, but its a tube headed towards failure.