Hi all,
I've been playing with a boss LS-2 pedal and a micro preamp (based on an Engl) to essentially add an extra two channels to my MarkIIC+. (two clean, two lead)
LS-2 is set up to either route the signal through the front of the amp with effects loop bridged, or to go into the external...
You may be right... Then Markllc+'s must be for bassists who can play guitar!
...seriously though, since picking up bass I've become one of the few guitarists I know that can keep in time.. :wink:
hehe :twisted:
Hiya,
I have a bit of hum in general and Volume 1, Middle and Lead Drive pots are crackling/dropping out when I turn them.
Does this sound like the preamp tubes failing?
If so which valve positions would be to blame?
Or do my pots just need a clean? :)
Cheers
If I drive a bass speaker box with th Mkllc will I be likely to damage the amp?
I don't have a bass head and am doing a few gigs as a bass player..
I would probably be playing quite loud.. (as loud as a 100watt mkllc and a 2x12 8ohm bass cab will allow...)
Cheers
Thanks for the fast reply!
Anyone able to confirm the no damage if accidentally switched to 100watt mode for the mkllc+?
I'm sure it's as per the other 60/100watt Mark series but better safe than sorry..:)
Cheers
Hi,
I only ever use my amp in the 60watt position, will I damage it if I run it with only two power tubes installed instead of four?
Is it the outside pair that operate on 60watts and the two inner ones that kick in in 100watt mode?
Cheers
Thanks,
Are these the ones you used?
Did you just put them in two sockets or all four?
SUBSTI-TUBE 928-PR Duet Power Reducer Class A converter
Octal to 9-pin adapter for the use of EL-84 tubes in an octal socket. This converts class A/B amplifiers to class A for lower power. Set of two with...
Hi,
anyone with any experience using the THD yellow jackets in a MKllc?
What are the possible configurations and tone/output changes?
I'm having problems getting the sound I want at a volume that small venue sound engineers can handle, so I thought the yellow jackets might help...
Cheers
Hi,
Does anyone have any plans for 2x12 bass cabs they wouldn't mind posting?
I've a couple of vintage celestion "studio 12's" bass drivers I want to build a home for
Cheers
Hi
I've been looking for a second hand thiele cab in Australia but to no avail.
I want an appropriate looking extension cab for my boogie mkllc+ and as I have a spare driver I though I'd build one.
Any help with specsor plans, particularly baffle/port design or internal cab pics would be...